
(And with several revisions possible over the course of a month or two, that gets pricey as well.)Īny suggestions? I'd like to convert my SketchUp design into a solid 3D ACIS (.sat) model, that I can then convert to. I also looked at Mesh to Solid from Sycode ( )- has anyone used this? It's $20 for 7 days if it works well, that's not bad but it might be a total waste if it doesn't work well.
HOW TO CONVERT STL TO A SOLID MESH ENABLER FREE
I looked at SUSolid ( ), but I'm not sure if it will do what I want, and I don't want to spend the money on it in case it doesn't. Mesh enabler free A non-expiring version of the Mesh Enabler add-in for Inventor 2014 is available via the Autodesk App Exchange for Autodesk Subscription Customers. SLDPRT in SolidWorks but apparently that's all still wireframe. I've found ways to convert the SketchUp into STEP, IGES, STL, Parasolid, and had someone else convert it to. We gathered all you need to know right here. Converting an STL to OBJ, however, is quick and easy. Is there any way of doing this without expensive software? (with free/open source plug-ins?) Changing a file's format can be annoyingly frustrating at times. (I think currently it's a wireframe, but for mold design / quoting apparently it needs to be a 3D solid model.) The Inventor Mesh Enabler is a free (but time limited) technology.
HOW TO CONVERT STL TO A SOLID MESH ENABLER HOW TO
How to install & use Mesh enabler for Inventor 2016 2015 - Convert STL surface/mesh file to SOLID - Duration: 2:18. Then you have a solid that can be edited. Once the addin is loaded you simply expand node to see the 'meshfeature1' as shown and right click and select 'Convert to Base Feature'. Now you need to use the mesh enabler tool to convert it to a solid. Summary of the exchanges and list of solutions, also summarized in article CS69498.

New in SOLIDWORKS 2018 is the Surface From Mesh tool, it lets you manipulate a mesh object that you imported from an. The picture absolutely shows its coming up as a mesh. To close this community thread on How to convert. Which is allows to import of much more data with more information to Inventor.I'm also looking to convert a SketchUp file to a solid. If you ever have a need to import Catia mesh models, head on over to Autodesk Labs and pull down Mesh Enabler for Inventor. stl file could be converted into solid body, however, it will still be tessellated. How to import an STL mesh and convert it into editable geometry in Autodesk Inventor (surface or solid). The obtained model is a 3D mesh, which cannot be edited in Inventor or converted to workable objects. Our conversion tool of choice is FreeCAD because it’s free, relatively simple to use, and does a good job of converting. Use a different extension to collaborate About Importing Files from other CAD Systemsįrom version 2021 there is a link between Revit and Inventor data with An圜AD for seamless interoperability. STL files can be imported into Inventor using the Open command. stl file to a file that you can mill on the the milling machine. Autodesk does not recommend the use of one over another, nor guarantee their successful operation. These 3rd party converters can be found on the Internet. After installation of the Mesh Enabler tool, load the Add-In (Go to Tools ribbon, select Add-in button and load the application). If your data is too big try to cut it using Autodesk Meshmixer. Then import it into Inventor as a surface, stitch it, and convert it to solid, or work with the imported surfaces. Note: Mesh Enabler has a capacity limitation, it can convert the mesh feature with no more than 5000 triangles. You need to import the mesh, convert it to a surface, and then make it solid. FreeCAD can convert meshes into solids, however ive had it fail for very complex meshes.

MeshLab cannot help with that, as it only deals with meshes. a model you could export as a STEP or IGES file. Use 3rd party converters There are also 3rd party products that you can use to convert the STL file to a different format. However, it sounds like you want to create a CAD solid, i.e. Open the produced SAT or DWG file in Inventor, then stitch and convert to solid as needed.(This operation can also take a long time.) Once the file has been imported, choose Export and select the file type *.SAT or *.DWG.The operation steps are as follows: In the WelSim software, create a new FEM Project, and select Import Geometry from the menu or toolbar. (This operation can take a long time, depending on the model's size and complexity.) Users can quickly complete the meshing projects by importing STL files, generate tetrahedral solid meshes (Tet4), and export FEA mesh files for subsequent finite element analysis. Mesh Enabler | Inventor | Autodesk App Store Use 3ds Max to convert STL files to other formats You can also use 3ds Max to import the STL mesh and then export it to SAT or DWG format, which can later be imported into Inventor:
